Project
™
®
Item
Quantity
CSI Section 11400
Approval
Date
E4 Electric Fryer-and-
a-Half Fryers
Models
FPRE14-7
Standard Features
• FootPrint® filtration
• Full/Half vats
Options &
Accessories
Frypot covers
• Deep cold zone
• Swing-up, ribbon type elements
• Open-pot design
• Centerline temperature sensor
• Casters
• Computer Magic
• Rear oil flush
• Automatic melt cycle
• Boil-out mode
Specifications
The Frymaster FPRE14-7 Full Vat/Half Vat electric fryer is
specially designed for non-traditional restaurant operations,
to be used under a ventless hood. It features the FootPrint®
Filtration System, which fits neatly underneath the fryer,
requiring no additional floor space. This hands-off filtering sys-
tem sets new standards for cost savings, safety, ease of opera-
tion and reliability. The entire filtering operation is automatic
and takes about 3 minutes to complete.
temperature on command. It is simple to program and repro-
gram changes right on the grease-proof control panel. Self-
cleaning electric elements have low-watt density for increased
reliability and extended life.
The swing-up, ribbon designed elements provide the best
possible efficiency in transferring heat. They swing up to
expose the open frypot, allowing every inch of the frypot to
be cleaned and wiped down by hand. The deep cold zone
catches crumbs and sediment from the frying area. These
particles are trapped in the cold zone where they do not car-
bonize, contaminate shortening or cling to fried foods. A rear
flush feature moves sediment to the front drain valve for easy
and thorough removal. If desired, only the one-half size frypot
can be used during off-hour frying when traffic is light; thus
saving energy and prolonging shortening life.
The FPRE14-7 Full/Half Vat fryer has a minimum 40-lb. (20
liters*) and maximum 50-lb. (25 liters*) shortening capacity in
the full vat. It has a minimum 20 lbs. (10 liters*) and maximum
25-lb. (12 liters*) shortening capacity in the half vat. The full
vat frying area is 13-13/16” x 15-1/2” (351 x 394 mm); half vat,
6-1/2” x 15-1/2” (165 x 394 mm) and can be located on the left
or right side. The COMPUTER MAGIC® controller assures pin-
point accuracy of shortening temperature, extending shorten-
ing life and producing a uniformly cooked product.
This model is available with stainless pot and door, with
enamel cabinet or with stainless pot, door and cabinet.
Centerline temperature sensor mounting permits instant
response to temperature drops caused by cold food placed in
the cooking area. Computer Magic automatically adjusts cook-
ing time, and signals when each load is done. LED readouts
display cooking time count down, and provide precise frypot
*Liter conversions are for solid shortening @70°F.
8700 Line Avenue 71106
Tel: 318-865-1711
P. O. Box 51000 71135-1000
Shreveport, LA
Tel: 1-800-221-4583
Fax: 318-868-5987
Bulletin No. 818-0191 9/07
E-mail: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
™
®
INCHES
[MM]
DIMENSIONS
TOP VIEW
24.0
[608]
30.9
[786]
25.9
[658]
45.3
[1151]
2.3
2.3
[59]
[59]
36.6
[929]
CORDSET
LOCATION
CORDSET
LOCATION
DRAIN
HEIGHT
14.1
[357]
CORDSET
LOCATION
11.8
[300]
8.3
[212]
FRONT VIEW
SIDE VIEW
BACK VIEW
diMEnSiOnS
moDel ShortenIng
no. CAPACIty
overAll SIze (cm)
DrAIn
heIght weIght
net
ShIPPIng InformAtIon
weIght ClASS Cu. ft. DImenSIonS
heIght
wIDth
length
FPRE14-7 50 lb. Full Vat
(25 liters)
45.30”
24”
30.90”
11.8.”
290 lbs.
370 lbs.
85
47.25
H
W
L
(1151 mm) (608 mm) (786 mm) (300 mm) (132 kg) (168 kg)
54”
36”
42”
25 lb. Half Vat
(12 liters)
(1372 mm) (914 mm) (1067 mm)
pOwEr rEquirEMEntS
nOtES
(2 supply connections required)
Wire size specified at 60°C minimum *neutral required
(4 wire wye system). This fryer is provided with two
separate power supply connections, one for the full vat
and one for the half vat (cords not provided).
3 PhASe
voltAge
full vAt 14 kw
hAlf vAt 7 kw
Amps Per
Leg
Wire Size
Amps Per
Leg
Wire Size
(awg. mm2)
(awg. mm2)
208
240
480**
380/220*
415/240*
39
34
17
22
20
6 (16)
6 (16)
10 (6)
10 (6)
10 (6)
20
17
9
11
10
10 (6)
10 (6)
14 (2.5)
14 (2.5)
14 (2.5)
cLEArAncE inFOrMAtiOn
A minimum of 24” (610 mm) should be provided at the
front of the unit for servicing and proper operation, and
6” (152 mm) between the sides and rear of the fryer to
any combustible material.
*Minimum recommended wire size for 60°C wire. 1 phase available.
**480V unit will have an additional 120V power cord.
HOw tO SpEciFy
SD
SC
Stainless steel pot and door -- enamel cabinet
Stainless steel pot, door and cabinet
8700 Line Avenue 71106
P. O. Box 51000 71135-1000
Shreveport, LA
Tel: 318-865-1711
Tel: 1-800-221-4583
Fax: 318-868-5987
Bulletin No. 818-0191 9/07
Litho in U.S.A. ©Frymaster, LLC
E-mail: [email protected]
We reserve the right to change specifications appearing in this bulletin without incurring any obligation for equipment previously or subsequently sold.
Download from Www.Somanuals.com. All Manuals Search And Download.
|